Our new Appfire Documentation Space is now live!

Take a look here! If you have any questions please email support@appfire.com

Follow Up Transition Post-Function

This is the documentation of JSU for Jira Cloud. If you are using JSU on Jira Server or on Jira Data Center, see our JSU Server/Data Center documentation.

Description

The Follow Up Transition post function evaluates the workflow conditions of all the next transitions on the target status of the current transition. If exactly one condition is valid, that transition will be triggered as a follow-up.

Configuration

The Follow Up Transition post function does not have any additional parameters to configure, however, you must have a least one workflow condition configured.

Consider the following workflow:

  • Our issue has a mandatory number custom field.

  • At the end of the Go transition, we have configured a Follow Up Transition post function.

  • Each transition leading away from the status junction has a workflow condition:

    • 'Under Five' has the condition: Number field < 5?

    • 'Exactly Five' has the condition: Number field == 5?

    • 'Over Five' has the condition: Number field > 5?

  • When the user performs the Go transition, this will always trigger a follow-up transition.

For example, if the user enters Number=3 during the Go transition, this leads to the in progress status. If they enter 42, this leads to closed.

We have been careful to configure our workflow conditions so that always exactly only one condition can be true. This way, the user will never be stuck at the junction status.

Conditions

Let's continue the example from above, where a number field is evaluated. We will configure three conditions; one for each outgoing transition from the junction status.

Under Five

Exactly Five

Over Five

Simple Yes / No example

A simpler use case is when you have only two transitions leading away and you evaluate the same condition; one condition is negated.

  • a == b? 

You can use Jira’s Value Field conditions for this setup.

  • Check it: Follow Up Transition post function

  • Yes: Condition a == b?

  • No: Condition a != b?

Fast forward example

Some extra steps in your workflow might only be necessary if a condition is not fulfilled. Otherwise, that step could be skipped.

Management approval

See the Conditional Approval Process use case for another real-life example.

Asynchronous execution

Troubleshooting

Problem: Workflow is blocked at the Junction status

Cause: Not exactly one condition

Usually, the problem can be tracked down, by reviewing the expected outcome of the post function:
”If exactly one condition is valid, that transition will be triggered.”

It's important that you do your analysis with the same user that encountered the problem. There might be issues with permissions that could lead to a different result, depending on the user performing the transition.

If you look at an issue blocked at the Junction status: How many transition buttons does it have? Only if there is exactly one transition button, 'Follow up' will be triggered. If you have none or more than one transition button, you must review your workflow conditions on the transitions leading out from the Junction status.

If there is only one button, there might be something wrong with that following transition. For example, a validator could prevent the transition from getting completed. Try (with the same user, who got stuck in Junction) to click that button to see what happens.

Cause: Triggered transition fails

Another reason might be that the triggered transition does not run through. For example, if it has a validator that fails.

You can learn more about workflow validators in Atlassian’s Configure Advanced Issue Workflows article.